Saving Your High Voltage Electrical Networks From Short Circuits and High Voltages

If you are working in an industry where high voltage electrical systems are installed and used, then you must know that electrical systems are the most important part of any industry and are solely responsible for smooth working of the industries. In order to run all the heavy machines of an industry in a proper way, it is necessary to provide regular and adequate supply of electricity to them.

In order to keep the electrical system of an industry in good working state, it is essential to choose the electrical components wisely and carefully. You should choose the components for your electrical network with best quality and right load capacity. If you choose an electrical component, which is not of proper load bearing capacity, your machinery will not be able to work at its maximum efficiency and would lead to loss to the company. If the quality of the electrical components is bad, you might have to face serious accidents in your company.

A major component used in all the major electrical systems is the drop out fuse. The drop fuse is used for protection of the electrical components and equipment from threats like short circuit and extremely high voltage than prescribed. If at any point, there is a higher voltage supplied to the system than prescribes or rated, the drop out fuse cuts off the supply to the system and saves the equipment and components from damage. Same happens during a short circuit.

Saving Your High Voltage Electrical Networks From Short Circuits and High Voltages

When you are looking for a drop out fuse for your high voltage circuit, Compaq can be a viable solution for you. Compaq offers a wide range of polymeric drop out fuses with the best quality and superior performance in even the most extreme working conditions. The drop out fuses offered by Compaq are fabricated to satisfy the various needs of the clients such as sturdy and fast operation, early arc extinguishing and fast cut off of power.

The raw material used for fabricating Compaq drop out fuses is the best in class and ensures long life of the product, which will serve you for a long time without the need for any major maintenance. The drop our fuses offered by Compaq are installed on the basis of a two pole structure and can be mounted horizontally or vertically according to the requirements. The working range of the Compaq polymeric drop out fuses is also very wide and starts from 11Kv and goes up to 33Kv. Here are some technical properties of Compaq drop out fuses.

Sr. No. Properties Value
1 System Voltage 11kV
2 Rated Voltage 12kV
3 Rated Current 400 AMP
4 Impulse with stand voltage to earth Across the Terminal 75kV- 75kV(minimum)
5 Power Frequency volt to earth Across the Terminal 28kV -35kV
6 Rated Short time current for 1 Sec. 10KA
7 Material for Insulator Polymeric
8 Governing specification IS 9921-1985, IEC 61109
9 Colour available Red & Gray

The wide range and high quality of products has made Compaq the best solution for all the industrial needs of their clients.

Author’s Bio: The author is an electrical engineer and loves to write technical articles for compaqinternational about polymeric drop out fuses. His job is to provide useful information about various products to the customers through his articles.