Electrical accessories have been used in most of the industries, and they are the reason for smooth and safe working of the heavy electrical networks in most of the industries. Buying the best quality of electrical is a must for safety of electrical network and the components of the network. You also need to choose the right type of accessories for best output from them.
One of the major electrical accessories that are used extensively in many industries is heat shrinkable transition joints. The heat shrinkable transition joints offered by Compaq are designed in such as way that they serve the best of their purposes such as strain relief, electrical performance and save the cable joint from different outer effects such as environmental factors, mechanical impacts and chemical contact. The transition joints are applicable to three core cables and are designed to bear load up to 12 KV. The transition joints are suitable for cable size ranging from 16 sq mm to 630 sq mm. They are subjected to various tests to comply with the standards set by different quality assurance agencies such as IS: 13573 etc.
Another cable accessory that is used in industries is cold shrink straight through joint. Cold shrink cable joints are the modern day solution for cable joints and are very easy to install. The cold shrink cable joints offered by Compaq are the best option to create premium quality joints in very less time, as it does not involves any gas flame heating to conceal the joint. The cold shrink joints provide you the best stress relieving option from the cable joints. The Compaq cold shrink joints are available for single core and three cables and can be subjected to a vast range of loads ranging from 12 KV to 36 KV. The cold shrink cable joints provide best protection to the joints from the outer effects such as mechanical impacts, chemical contact and environment.
There are many specific tests that are conducted on the products at Compaq, to make sure that products do comply with the safety and working standards set by various international agencies such as IS:13573, IEC 60502 etc. The various tests that are conducted on the cable joints are AC voltage withstand test, DC voltage withstand test, partial discharge test, thermal short circuit test, etc. These cold shrink joints are also applicable to a vast range of size of cables varying from 50 s mm to 500 s mm.